Diamond guide

How Are Lab-Grown Diamonds Made?

Watch on YouTube

Lab-grown diamonds are made in one of two ways: HPHT, which crushes carbon around a diamond seed under extreme heat and pressure, and CVD, which builds the diamond from a carbon-rich gas, layer by layer. Watch the one-minute video, then see how the two methods compare.

Two ways to grow a diamond

Every lab-grown diamond starts with a seed: a tiny piece of diamond. What happens next depends on the method.

HPHT CVD
Stands for High Pressure, High Temperature Chemical Vapor Deposition
How it works Graphite and molten metal surround the seed, and carbon crystallizes onto it under crushing pressure Microwaves turn hydrogen and methane into a glowing plasma, and carbon settles on the seed in layers
Pressure Like rock about 150 km below the surface No crushing pressure
Temperature 1,300–1,600 °C 900–1,200 °C
Growth time An hour to weeks Weeks; the largest crystals, reportedly about nine months

HPHT runs hotter than the zone where natural diamonds form, which is why it grows fast.

The step that often comes after

CVD diamonds often come out of the chamber brownish. Among the CVD diamonds submitted to GIA, about 80% have been given a post-growth HPHT treatment to improve their color. So many CVD diamonds have been through both machines. That share is of GIA's submissions, not of every lab-grown diamond made.

Either way, the same diamond

A lab-grown diamond is the same diamond, chemically and structurally, just grown in a lab instead of mined out of the ground. Your eye can't tell the difference. A gemological lab can.

For what a lab-grown diamond is, how it is graded and how it compares with a natural diamond, read the full guide: What Is a Lab Grown Diamond?

Video transcript

How do you grow a diamond? Two ways. One crushes it into being. The other builds it from gas. Every lab-grown diamond starts with a seed.

Method one, HPHT. Graphite and molten metal surround the seed, squeezed like rock 150 kilometers down and heated past 1,300 degrees Celsius.

Method two, CVD, needs no crushing. Microwaves turn hydrogen and methane into glowing plasma, and carbon settles on the seed in layers, for weeks.

CVD diamonds often come out brownish. About eight in ten that reach GIA have gone back under heat and pressure to whiten them.

Either way: same diamond, chemically and structurally, just grown in a lab instead of mined out of the ground. Your eye can't tell. A lab can.

Would you have guessed some diamonds go through both machines? More on deeve.ca.

The pictures in this video are AI-made illustrations, and the narration is an AI voice.

Sources

  • GIA, “HPHT and CVD Diamond Growth Processes” (2016)
  • Gems & Gemology, Summer 2024
  • FTC Jewelry Guides, 16 CFR 23.12